http://www.alscrapbooking.com/rub-transfers/
If you are dissatisfied with the quality of your printer thermal transfer or direct thermal? Do they have unwanted lines and / or white spots in print? If so, your thermal transfer printhead might need cleaned or replaced. The printhead is The most critical component of your thermal printer and one of the most delicate. Before deciding whether or not you need a new thermal transfer head printing, you must first clean it properly. You can clean a print head by rubbing with an alcohol swab or better yet, buy ribbon equipped
"CleanStart.
What is "CleanStart" ribbon? "CleanStart" is a barcode ribbon that has a function of cleaning the printheads special beginning of each roll IIMAK. IIMAK is one of the most important U.S. companies based manufacturers of tape barcodes. After installing your new roll of ribbon in the printer, just close the print head at the beginning of the White "CleanStart" cleaning tape and pull the print head closed. Reopen the print head and feed the ribbon through the final configuration and installation. Close the printhead and printing.
If print quality does not improve then more troubleshooting is needed. Many of these printers are very capricious and slightest adjustment can make all the difference. Check the heat setting on the printer to make sure it is hot enough. This can usually take care of some lines or discoloration in the image is printed.
The next step for troubleshooting the printer is check the roll of platinum. This is the rubber roller which is just below the printhead. Many users of damaging the cylinder support taking a knife to get excess adhesive label paper or stuck to roll off. This is a BIG no-no! Never take a knife or blade the roller support. This roll is essential to maintain consistent print quality. Search nick in the roll and if there is one, have a service representative to replace the platinum roller.
There is no break in the cylinder support? The next step is to inspect the printhead with a light and look right on the black sensor that meets the labels when they are closed. You will Open the print head to see. Check the printhead for the white spots. White spots on a print head indicate the damage and wear during his lifetime of printing. If white spots on the print head, This is a good indication it is time for a new printhead. Life of print head can vary in length depending on how it is maintained. Wiping your printhead with an alcohol swab before each use will ensure the cleanliness and the protection of the buildup. The same positive results occur with the proper use of a CleanStart "ribbon. Proper maintenance will result in lifetime Maximum print head.
Now, if your troubleshooting indicates that you need a new printhead, then are some decisions to make. Would you buy the printhead exact OEM? Or Would you buy a quality print head compatible? Many times it is the same manufacturer makes both. There are not very high quality print head mark on the market that can save you lot of money. Printheads OEMs are typically required for certain guarantees, but if you can, we propose to go with a private brand, print head, high quality as a replacement since they are much cheaper and work just as well.
About the Author:
John Barth founded Adazon Barcode Labels and Barcode Equipment www.adazonusa.com in 2003 and has a wealth of information in the barcode arena from over 20 years of experience in distribution. John’s experience allows companies to cut costs on barcode printheads, custom labels and total barcode solutions. For more information call 847-235-2700.
Article Source: ArticlesBase.com – Issues With Thermal Transfer Printheads?
Introduction Part 1- Tatouage Dry Rub Transfers- from www.HouseofTatouage.com
|
HUGE Scrapbooking Lot- Paper, Rub On Transfers, Album
$9.99 |
|
New My Mind's Eye Transfer Title Girl DELIGHTFUL RUB-ON
$1.59 |
|
New My Mind's Eye Transfer Title BIRTHDAY GIRL RUB-ON
$1.69 |
|
My Mind's Eye Rubon Transfer Title PARTY TIME RUB-ON
$1.59 |
|
New My Mind's Eye Transfer Title FIRST SNOW RUB-ON
$1.59 |
|
Rickman Metisse dry rub transfer set = tank,seat,fender
$49.99 |
|
5 Sets Rub-On Transfers-Cows Fishing Garden Chickens
$3.99 |
|
LOT OF 12 RUB ON TRANSFERS
$2.99 |
|
LOT OF 17 LADIES COLLAGE E-Z RUB ON TRANSFERS. NEW
$9.99 |
|
MARTHA STEWART ~ Halloween Border Transfers - Rub Ons
$2.50 |
